RSX Factory Alarm Arm/Disarm, Viper

Home / the12volt's Install Bay / Car Security and Convenience / RSX Factory Alarm Arm/Disarm, Viper (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

kanadian24

Member - Posts: 2

Joined: June 06, 2006

Location: Canada

Posted: June 08, 2006 at 9:32 PM / IP Logged

I searched and found a little information. Need clarification.

My Viper alarm does not have outputs for arming/disarming a factory alarm.

So, I was thinking of hooking up:

Viper (-) door lock to WHITE/ RED factory Rearm

Viper (-) door unlock to WHITE factory Disarm

Would it work? When the Viper system arms it locks the doors and arms the factory alarm. When the Viper system disarms it unlocks the door and disarms the factory alarm.

I want to retain the factory immobilizer and blinking dash light. Oh ya, diodes on all four wires (lock/unlock, arm/disarm)

Let me know. Thanks.

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: June 08, 2006 at 11:08 PM / IP Logged

Sounds about right.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

kanadian24

Member - Posts: 2

Joined: June 06, 2006

Location: Canada

Posted: June 09, 2006 at 12:55 AM / IP Logged

On a RSX forum, I was told that simply lock/unlock will arm/disarm the factory alarm without the need for additional connections... I am going try that first. If it doesn't work, then I will do as suggested.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

RSX Factory Alarm Arm/Disarm, Viper

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.