hornet 554T

Home / the12volt's Install Bay / Car Security and Convenience / hornet 554T (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: January 11, 2003 at 1:52 PM / IP Logged

i installed a hornet remote starter, alarm, pager on this 2003 chevy trailblazer and everytime the customer wants to remote start the car the hornet alarm sounds the siren the car remote starts and everything but this happens. it seems to happen after the car sits for a while, why does this keep happening???? i have installed a pldata bypass and a gmdl1 interface can someone explain why this keeps happening i am lost here .

Search for other posts by mobiletoys2002

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 11, 2003 at 5:41 PM / IP Logged

If the Hornet systems alarms while remote starting, then there must be a trigger on one of the points of entry or a wire gets ground or power when it's supposed to only be 0 at time of start. Make sure that you are checking the door trigger wires and they are not getting voltage when the RS starts.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

djfearny2

Silver - Posts: 810

Joined: September 23, 2002

Location: United States

Posted: January 11, 2003 at 6:23 PM / IP Logged

hornet is dei do get the 455g from dei it takes care of your problem.

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

hornet 554T

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.