the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Keyless Entry 93 Ford Explorer


Post ReplyPost New Topic
< Prev Topic Next Topic >
1Hawkeye 
Member - Posts: 3
Member spacespace
Joined: January 25, 2003
Location: United States
Posted: January 25, 2003 at 4:27 PM / IP Logged  

I need help locating the programming connector for my keyless entry.  I have the instructions from Ford, 2 new remotes, but I want to make sure I jump the correct pins.   I did locate a loose cable in the rear quarter panel when the connection is supposed to be.  I talked to an alarm installer and he was 'kinda sure' it was the connector.  Any help would be greatly appreciated.

Scott35 
Silver - Posts: 258
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: August 02, 2002
Location: United States
Posted: January 25, 2003 at 5:38 PM / IP Logged  
I always take a paper clip and jump the pins, the key has to be in the run position. If it is the right pins the locks will cycle through. Then push a button on one then another remote.
Tacomacrew
1Hawkeye 
Member - Posts: 3
Member spacespace
Joined: January 25, 2003
Location: United States
Posted: January 25, 2003 at 7:14 PM / IP Logged  

and if its not the right connector?  Boom??? bye bye computer???  the guy at the install place said it might be the connector or it could be my air bags.  Since I don't have air bags.  I'm hoping its the right one.  Thanks

Scott35 
Silver - Posts: 258
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: August 02, 2002
Location: United States
Posted: January 25, 2003 at 8:37 PM / IP Logged  
The connector is in the drivers side rear panel, pull your tool cover off and look towards the front of it, should be a plug not hooked to anything.
Tacomacrew
1Hawkeye 
Member - Posts: 3
Member spacespace
Joined: January 25, 2003
Location: United States
Posted: February 02, 2003 at 8:35 PM / IP Logged  

Thanks Scott, it worked great, saved me lots of money!!!!


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer