locks wiring

Home / the12volt's Install Bay / Car Security and Convenience / locks wiring (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

Lambros

Member - Posts: 10

Joined: February 02, 2003

Location: Cyprus

Posted: February 02, 2003 at 7:31 PM / IP Logged

I am trying to install an alarm to my sebring 96' but I have no idea what king of wiring my car as for lock/unlock system. Is it "3 wire Possitive" or negative. Shall I connect both wires from the relays to JUST one wire on the lock/unlock switch that is WHITE/ Green. Please if anyone know smth, let me know.

Thank u

Lambros

Player69

Silver - Posts: 504

Joined: October 27, 2002

Posted: February 02, 2003 at 7:52 PM / IP Logged

THe locks are negative 3 wire. They are Brown and BROWN / white in the drivers kick panel.

Haku

Copper - Posts: 204

Joined: November 22, 2002

Location: United States

Posted: February 02, 2003 at 8:14 PM / IP Logged

My information shows a one wire lock/unlock system. A positive pulse through a 620 ohm resistor on the WHITE/ green wire will lock the doors, a positive pulse through a 2.7K resistor on the same wire will unlock the doors. To make it easier to do, use a DEI 451M door lock module, they usually come with an assorted pack of resistors also. It can be done with two relays. If you need a 451M, I have a few extra, I would sell you one for $5.00 plus shipping.

Shawn

Siemens Autostart ip3@centurytel.net

Hak

Siemens Autostart

Lambros

Member - Posts: 10

Joined: February 02, 2003

Location: Cyprus

Posted: February 02, 2003 at 8:20 PM / IP Logged

Thank u Hanky for your reply, but could you please tell me where shall I put the resistors. Is it in series to the relay and the lock/unlock swith, or in series to the alarm and the relays wires.

Thank u

Lambros

Member - Posts: 10

Joined: February 02, 2003

Location: Cyprus

Posted: February 02, 2003 at 8:21 PM / IP Logged

.....and another thing..the one wo sold me the alarm told me to put just one 1200Ohm resistors on the unlock wire.

thnks

Haku

Copper - Posts: 204

Joined: November 22, 2002

Location: United States

Posted: February 02, 2003 at 8:22 PM / IP Logged

It is a convertable?

Hak

Siemens Autostart

Lambros

Member - Posts: 10

Joined: February 02, 2003

Location: Cyprus

Posted: February 02, 2003 at 8:23 PM / IP Logged

Yes. 96 chrysler sebring conv.

Haku

Copper - Posts: 204

Joined: November 22, 2002

Location: United States

Posted: February 02, 2003 at 8:30 PM / IP Logged

I cant cut and paste the diagram. Email me your email adress, and I will email you the diagram.

ip3@centurytel.net

Hak

Siemens Autostart

Lambros

Member - Posts: 10

Joined: February 02, 2003

Location: Cyprus

Posted: February 02, 2003 at 8:49 PM / IP Logged

thnks for your reply. I emailed you my email.

Haku

Copper - Posts: 204

Joined: November 22, 2002

Location: United States

Posted: February 02, 2003 at 8:57 PM / IP Logged

Or go here https://www.the12volt.com/doorlocks/page2.asp#dc

Hope it helps.

Shawn

Hak

Siemens Autostart

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.