reservation mode

Home / the12volt's Install Bay / Car Security and Convenience / reservation mode (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

aesm78

Member - Posts: 1

Joined: July 10, 2006

Location: United States

Posted: June 01, 2007 at 1:42 PM / IP Logged

Quick question, how does one enable the "reservation mode" on a Aftermarket Generation alarm? Their website and manual aren't that much help. http://aftermarketgeneration.com/catalog/product_info.php?cPath=23_28&products_id=32

I installed this alarm on my car and I was trying to use the remote start feature but I can't get it to work. After reading the manual I found a slight note that indicates that I have to enable "Reservation Mode" but the manual does not tell you how to do this.

Aftermarket Generation

model: AGA1210

Under Remote Engine Start

NOTES*

"3. For manual transmission vehicles, only when you've been setting the

reservation mode, you can start your vehicle"

Your help is greatly appreciated,

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: June 01, 2007 at 2:16 PM / IP Logged

Normally you go thru a sequence of setting the ebrake, with the foot brake shut off the key (vehicle stays running) get out close the door, the rig shuts off.

This is reservation mode. The remte start knows the rig is in nott is gear. If you open the door with out remote starting, the sequence is broken, and it will

NOT remote start. That web site is LAME.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

reservation mode

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.