DEI554T LCD Remote question

Home / the12volt's Install Bay / Car Security and Convenience / DEI554T LCD Remote question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Maddog3/3ACR

Member - Posts: 6

Joined: February 18, 2003

Posted: February 18, 2003 at 5:02 PM / IP Logged

When my alarm is triggered or remote start is activated, it doesn't show it on the the screen of my remote.

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: February 18, 2003 at 7:30 PM / IP Logged

are you sure, which way is the alarm trigger? if by door then the door lights up, if the sensor then the hammer comes on. if auto start, then the 3 little smoke cloud comes on.

Maddog3/3ACR

Member - Posts: 6

Joined: February 18, 2003

Posted: February 18, 2003 at 9:19 PM / IP Logged

Yes, I'm sure. None of the two way features work. The remote works, I can arm and disarm the alarm and the remote start works fine. It just doesn't page me when the alarm goes off. Also the tempurature inside the car will not work.

Maddog3/3ACR

Member - Posts: 6

Joined: February 18, 2003

Posted: February 18, 2003 at 9:24 PM / IP Logged

Everything was working fine for the first week until one day i noticed the antenna icon disappeared like i was out of range. I was right next to the car when this happened. Now the unlock icon stays on even when I arm the alarm.

securinu

Silver - Posts: 772

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 15, 2002

Location: United States

Posted: February 18, 2003 at 9:59 PM / IP Logged

should be under warranty. go get a new one

crvz

Member - Posts: 48

Joined: February 18, 2003

Posted: February 18, 2003 at 10:00 PM / IP Logged

I have one of the dei two way remotes, and you have to set it up to recieve two way. it is possible to turn off the recieving signals on the remote. check out the manual and see if you can reset everything. let me know if it works.

Maddog3/3ACR

Member - Posts: 6

Joined: February 18, 2003

Posted: February 18, 2003 at 10:31 PM / IP Logged

I didn't find that part in the manual I have. Do you know how to reset it?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

DEI554T LCD Remote question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.