UNGO ms2007 radar sensor install

Home / the12volt's Install Bay / Car Security and Convenience / UNGO ms2007 radar sensor install (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

N1njaTurt1e

Member - Posts: 10

Joined: February 20, 2003

Posted: February 20, 2003 at 6:12 PM / IP Logged

I recently bought an UNGO ms2007 security system for my car. I also bought a radar sensor to go with the basic system. I was wondering if anyone had suggestions on how to hook-up the radar sensor to the system. I heard something about using diodes, does anyone know anything about this. Just in case it helps, I have a 99 Mercury Cougar. Thanks!

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 20, 2003 at 9:13 PM / IP Logged

You can wire in the trigger system to either the impact sensor ( if it has an external impact trigger wire ) or one of the door or hood triggers. Use a diode to isolate the sensor from the trigger wire that you are attaching it to. Have the cathode band facing the trigger wire if (-) trigger .

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

N1njaTurt1e

Member - Posts: 10

Joined: February 20, 2003

Posted: February 21, 2003 at 1:10 PM / IP Logged

Thanks for the info, I finally got my system today and I am planning on installing it next weekend. If I have any trouble I will put up another post.

ncollini

Member - Posts: 33

Joined: April 24, 2003

Location: Ohio, United States

Posted: April 26, 2003 at 1:27 PM / IP Logged

Velocity, should the cathode band be facing the trigger wire on both the green and blue wires?, Do I need a diode for each sensor or just the proximity sensor?

Thanks

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

UNGO ms2007 radar sensor install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.