clifford avantguard 5.1 06 dodge charger

Hello,

I have the mentioned alarm installed and Zone 8 keeps triggering shortly after arming... The manual lists it as Mux 2 Input Trigger - for optional sensors. I don't have any other sensors installed besides the included ones. My question is... Does anyone happen to know what could be causing this? I called my installers and they said that it was the proximity sensor, but that is Zone 1, which is set to the lowest sensitivity. I know my neighbors are probably wized off at me, because it goes off at random times. I'm hoping for a remedy. I'd appreciate any help or advice. My installers won't be available until Thursday.

Thanks again,

Curtis

Mods,

Please delete this thread... After further research, I'm inclined to believe that it's the 507M Digital Tilt-Motion sensor that's setting off the alarm.. I'll try cutting the black loop, setting it to normal sensitivity, to see if that helps.

Thanks again,

Curtis