2008 buick lucerne parking lights

I installed a remote start with keyless entry yesterday. I got all do and was checking out the system and found that the parking lights were not working. I checked all fuses and checked the wire that I used on the car to make sure that it didnt break. Everything checked out ok. I have no idea why the lights are still not working. If anyone has any info please let me know.

Parking Lights     BROWN / WHITE     (-)     AT VEHICLE LIGHT SWITCH Is this what you hooked up to? Tech data says BROWN at parking light bulbs (+) and I don't see any special parking light diagram for this vehicle. You may want to test the brown wire at one parking light and see if you connect up to it that it will power the rest of them as well. If not You may need to diode isolate left and right.The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya

Scytek shows that as well. It says pin 8 in white connector at BCM located above passenger kick panel (-) light blue/tan.The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya

Audivox says BROWN / White at the switch (-). Just to get another tech site in.