relay

Hi im new to this site and had a question ,

dose anyone have a diagram for this type of wiring ;... im wiring a motorcycle , i have a momantary swithch that will be fed by 12v + i need it to switch from high beem to low beem each time it is pressed the switch is normally open , dose anyone out there have a diagram and what kind of relay to use ??? Thanks

https://www.the12volt.com/12voltimages/latchonoffsp.gif

Here is a diagram provided by the12volt.com - it should work!

Of course you will have to make that latching relay trigger another SPDT relay to do what you need.

Output of that relay setup to 86 of the new relay. 85 goes to ground. 30 to the battery via a fuse mounted at the battery. 87A to one of the light elements. 87 to the other element.