pulse latching problem?

Home / the12volt's Install Bay / Relays / pulse latching problem? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dave.towler

Member - Posts: 1

Joined: July 07, 2011

Posted: July 07, 2011 at 1:21 PM / IP Logged

Hi, will do my best to explain the problem and hope someone one can advise....

pulse latching problem? -- posted image.

I used the above 5 relay setup to work as an ignition switch for remote start of a generator. When the generator starts it works fine on/off perfect. Once the generator has been running a while the relays fail to unlatch I guess this is a back feed? Can anyone explain how to alter to stop this happening? Thanks

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 07, 2011 at 3:51 PM / IP Logged

1N4004 across the coils, bands towards 86.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pulse latching problem?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.