dei528t

hello, Today I tried to connect the 528t timer relay. I am going to use it for the front parking sensors,When I hit the brake it will activate the parking sensors for 30 secends and then switch off automatically. I connect the relay, Red   + Battery Black - Battery BLACK/ white to activate the relay. The relay is activated when I put negative in the BLACK/ white wire,but which are the out put wires? Orange red or brown? Can I activate the relay with positive?Because it only activate with negative input? Thanks

POS in on brown and out to rev aid on yellow. Ignore Orange. Yes cut the blue lop for POS input on the BLACK/ white. All of the above is in the instructions, you could have looked and saved a post!