Keyless Entry Help asap

Home / the12volt's Install Bay / Relays / Keyless Entry Help asap (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

austinreed21

Member - Posts: 11

Joined: December 14, 2002

Location: United States

Posted: December 28, 2002 at 8:43 PM / IP Logged

ok, i have my alarm installed, (VIPER 500 ESP) how do i hook up the power door locks? can i just run my alarm output to the wires stated in the wiring diagam? people have said no, and tha ti need relays, 30A 12V (standard)

how do i wire up from the relays to allow the keyless entry to work?

action wire color location

Door Lock ][ORANGE / White [] Behind Fuse Panel at Door Lock Relays

Door Unlock ][Pink/Purple [] Positive Trigger

kind of hard to explain,. but how do i wire up the keyless entry? what wires to connect to etc.. thanks

-austin reed-

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 28, 2002 at 10:19 PM / IP Logged

According to your information above ( without giving the make, model or year of the vehicle ) all you need to do is hook up the following:

Door Lock ][ORANGE / White --------------- BLUE wire on the H2 plug
Door Unlock ][Pink/Purple --------------- GREEN wire on the H2 plug

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

austinreed21

Member - Posts: 11

Joined: December 14, 2002

Location: United States

Posted: December 28, 2002 at 10:22 PM / IP Logged

dope- i am an idiot- its a 93 intrepid, but i think i need to use relays

-austin reed-

brianh

Silver - Posts: 518

Joined: August 25, 2002

Location: United States

Posted: December 29, 2002 at 7:33 AM / IP Logged

your vehicle has a posititve pulse door lock system. If you keyless entry unit gives you a negitive pulse you need to use two relays to make it work. First run your lock wire to the first relay on pin 85. Then run pins 87 on both relays and pins 86 on both relays to a fused 12 volt source.(5 amps) Run your unlock wire to pin 85 on the other relay. Then the pin 30 from each relay will go to the wire in the vehicle door lock system. (the relay that got the lock will go to the lock wire and so on.

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: December 29, 2002 at 8:43 AM / IP Logged

Actually the viper alarms have both a pos and a neg output ( check in the owners manual ). The wires first supply a ground and then suplly a +12v. All you would have to use is the blue for lock ( blue is neg unlock and pos lock ) and the green for unlock ( green is neg lock and pos unlock). That alarm should have a small three pin plug with the middle pin empty. These wires are a low level output but should still operate the locks.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: December 29, 2002 at 8:48 AM / IP Logged

Just double checked and my spare 500esp ( I have that alarm too) and it says right on the back that there are two ouputs for each door lock wire. You don't have to program anything just hook it up like i said above.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

austinreed21

Member - Posts: 11

Joined: December 14, 2002

Location: United States

Posted: December 29, 2002 at 11:17 AM / IP Logged

auex- so all i have to do it connect my output wires (BLUE AND GREEN) to the right wires within the car? (UNLOCK /LOCK)? its that easy? i thought i needed a relay, because the module wouldnt have sufficient power to do so? have you wired it up using only the blue/green wires before? has it caused problems? thanks

-austin reed-

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Keyless Entry Help asap

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.