trouble shooting 1993 mazda b2600i 4x4

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / trouble shooting 1993 mazda b2600i 4x4 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

b2600i

Member - Posts: 7

Joined: September 02, 2009

Location: British Columbia, Canada

Posted: September 02, 2009 at 5:20 PM / IP Logged

I am installing a Sony CDX GT220 deck in my truck I believe I have all of the wring correct but can't seem to get the deck to work once I plug the harness into the back it sound like I have power but nothing comes up on the screen. Any Ideas?

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: September 02, 2009 at 5:50 PM / IP Logged

It is probably getting constant power(yellow wire)...but no accessory power(red wire)...! Without a meter , it will be kinda diffucult to help...you can visually check the fuses...!!? Did you use a a aftermarket harness harness...or hack the harness off...?

Battery	BLUE/RED	(+)	RADIO HARNESS
Accesory	RED / BLACK	(+)	RADIO HARNESS
Ground	N/A
Illumination	BLUE/WHITE	(+)	RADIO HARNESS
Dimmer	N/A
LF Speaker (+)	BLUE/RED
LF Speaker (-)	BLUE / YELLOW
RF Speaker (+)	BLUE
RF Speaker (-)	BLUE/WHITE
LR Speaker (+)	BLUE/RED
LR Speaker (-)	BLUE/GREEN
RR Speaker (+)	BLUE/WHITE
RR Speaker (-)	BLUE/GREEN
Amp Location	NOT LIKELY
Steering Cntrls	NO
Speed Cntrl	NO
Radio Security	YES

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: September 02, 2009 at 5:51 PM / IP Logged

This is the part # they list for your truck...!

Metra Electronics Corp. - 70-1781

Description

Festiva/Tracer 88-93/Kia 1994/Mazda 86-89-Into Car

Product Specifications

Power and 4-Speaker
Plugs into car harness at radio
Two 4-pin speaker connectors, one 3-pin power plug and one 1-pin connector

Allows installation of an aftermarket radio using the existing factory wiring and connectors. No cutting of factory wiring is needed.

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: September 02, 2009 at 5:53 PM / IP Logged

If the original factory harness is intact...Plug the factory radio back in and see if that powers up...! Dont recall seeing any sparks... ey...?

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

b2600i

Member - Posts: 7

Joined: September 02, 2009

Location: British Columbia, Canada

Posted: September 02, 2009 at 6:12 PM / IP Logged

Nope, No Sparks, I had to hack the harness to attache the one that came with the deck, I will post again once I have double checked all of fuses etc. Thanks for the wiring info. one more question, would the illuminator cable corespond to the ant rempte wire from the sony deck?

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: September 02, 2009 at 6:39 PM / IP Logged

...Or maybe just bought a harness...No cutting required...! For next time...!

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 02, 2009 at 7:41 PM / IP Logged

b2600i wrote:

it sound like I have power but nothing comes up on the screen. Any Ideas?

Just curious, what does that sound like?

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: September 02, 2009 at 7:43 PM / IP Logged

i am an idiot wrote:

b2600i wrote:

it sound like I have power but nothing comes up on the screen. Any Ideas?

Just curious, what does that sound like?

LOL...I assumed he hears a small pop when he plugs the harness in...Was just my guess though...! trouble shooting 1993 mazda b2600i 4x4 -- posted image.

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 03, 2009 at 2:23 AM / IP Logged

No that would be a speaker grounding, do the lights come on or have we lost him.

b2600i

Member - Posts: 7

Joined: September 02, 2009

Location: British Columbia, Canada

Posted: September 03, 2009 at 9:52 AM / IP Logged

I would appreciate less sarcasm I'm just looking for a little help here. There is no pop but there is a sound of something moving internally, The nothing comes up on the display though.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.