Eclipse 5435 in Expedition

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Eclipse 5435 in Expedition (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hashk84

Member - Posts: 5

Joined: June 13, 2006

Location: Canada

Posted: June 13, 2006 at 1:36 PM / IP Logged

hey guys i am installing eclipse 5435 in 97 expedition and need some help locating these wires

vehical speed pulse signal terminal PURPLE / white :

this should be connected to the vehicle speed pulse signal terminal.

not sure where the speed wire is

-------

parking brake signal (RED / white)

i want to view dvd while car is moving so can any one please tell me how to do it.

do i just connect the brake wire from my unit to some ground?

----------

Reverse signal wire (green)

connect the reverse signal output of the vehicle to this terminal.

-----

any help is greatly apprecaited

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: June 13, 2006 at 2:29 PM / IP Logged

connect reverse wire to possitive signal wire going to reverse lights.

vss wire Speed Sense gray/black cruise control module

The cruise control module is on the driver side fender.

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

DYohn

Moderator - Posts: 10,741

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: June 16, 2006 at 9:54 AM / IP Logged

hashk84 wrote:

parking brake signal (RED / white)

i want to view dvd while car is moving so can any one please tell me how to do it.

It is illegal and unsafe to bypass safety interlocks on DVD players. Connect it as it is intended. Read the forum rules, instructions on bypassing these interlocks is not allowed here.

Support the12volt.com

hashk84

Member - Posts: 5

Joined: June 13, 2006

Location: Canada

Posted: July 12, 2006 at 4:47 PM / IP Logged

hey bro was out of town so couldnt finish the eclipse install earlier. well i am installing it today, connected all the wires, just the vss is left. i have looked under the hood driver side. i see alot of wires comming out from 2 fuse / relay boxes . is this where the vss wire going to be ?? there are soooo many wires in there, how do i find the right one :(

your help is very much appreciated

thankyou

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Eclipse 5435 in Expedition

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.