speed sensor, 2000 dodge intrepid

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / speed sensor, 2000 dodge intrepid (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jeff weaver

Member - Posts: 1

Joined: December 02, 2006

Location: United States

Posted: December 03, 2006 at 4:51 AM / IP Logged

im looking for easiest way to tie into the speed sensor wire on a 2000 dodge intrepid ,hooking up pioneer avic -n3?

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 09, 2006 at 10:58 PM / IP Logged

VSS WIRE

WHITE/ orange

On C2 connector at PCM

8000ppm

Located under the hood on the left side of the distribution block. There are 2 connectors on the PCM, C2 is the one closest to the front of the vehicle. The plastic cover on the connector can be removed by pressing on the tab on each side.

DATABUS INTERFACE

Pin-2(top row from left)

Diagnostic plug below dash

DATA

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

speed sensor, 2000 dodge intrepid

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.