vacuum diagram

Home / the12volt's Install Bay / General Discussion / vacuum diagram (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tylernye

Member - Posts: 2

Joined: April 12, 2008

Location: Texas, United States

Posted: April 12, 2008 at 6:36 PM / IP Logged

I have a 2004 Ford Explorer with the 4.0 V6. I am trying to get ahold of a vacuum diagram. I broke a vacuum line coming of the intake and I have no clue where it is suposed to attach so I need to get ahold of a diagram so I can figure out where it goes. Thanks.

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: April 13, 2008 at 12:22 AM / IP Logged

So you have a vacuum line hanging there not connected to a thing right?

And so given that you have a terrible vacuum leak right? The rig runs crappy

The line is only "so long" you cannot simply see how far it will go and look at all the potential places.

I would get a can of carb cleaner and have someone in the rig on the gas. Slowly spray the cleaner in the areas that you hose "could reach"

When you idol goes nuts..... take a look.

tylernye

Member - Posts: 2

Joined: April 12, 2008

Location: Texas, United States

Posted: April 13, 2008 at 7:51 AM / IP Logged

It ran really bad with it not pluged up so I just plugged it up and it runs fine its just now I have my check engine light on. Well I found out it is for the Evaporative system. So I order a new hose through the dealer and I will get them to show me where it goes.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

vacuum diagram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.