2010 ford transit

Home / the12volt's Install Bay / General Discussion / 2010 ford transit (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cwhittington

Member - Posts: 1

Joined: September 12, 2009

Location: Florida, United States

Posted: September 12, 2009 at 10:15 AM / IP Logged

Has anyone added power locks to this vehicle? If so, how did you do it?

curtis whittington

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 13, 2009 at 9:11 AM / IP Logged

It's been out over here for about 4 years and I've never seen one without power locks. Having said that and without having removed a door trim panel I'm guessing cable drive. If you google Sempal or better still MES locks you will see cable specific kits for the doors plus sliding door lock kits. If you're asking about controlling the existing locks, go to the GEM module, it should be at the top of the l/h kick panel. RED / Black lock and GREEN/ Black unlock neg, also it's possible to deadlock and dual stage unlock, front doors only leaving the rear and side locked or separate rear/side unlock

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2010 ford transit

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.