Help, I dented my sub

Home / the12volt's Install Bay / General Discussion / Help, I dented my sub (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

battsup

Member - Posts: 2

Joined: October 26, 2003

Location: United States

Posted: October 26, 2003 at 3:03 PM / IP Logged

I accidently dropped one of my subs on the other. The only damage is that the bubble on the dust cap got dented. How do i undent it?

Maxst

Silver - Posts: 866

Joined: June 06, 2003

Location: United States

Posted: October 26, 2003 at 5:17 PM / IP Logged

vaccum will work...just cut the suction so its not pullin alot of air.

I need quality equipment, feel free to donate.

battsup

Member - Posts: 2

Joined: October 26, 2003

Location: United States

Posted: October 26, 2003 at 7:33 PM / IP Logged

MAXST wrote:

vaccum will work...just cut the suction so its not pullin alot of air.

Exactly what do u mean by that? do u mean that by decresing the suction that it will come out easier? or the other way around. I tryed using the vacuum(actually 2 different ones) and i can get it to get a good grip but then when i go to pull the vaccum and sub let go of each other.

Maxst

Silver - Posts: 866

Joined: June 06, 2003

Location: United States

Posted: October 27, 2003 at 6:40 PM / IP Logged

crimp the hose so it does pull as much. once you pull it out some you could the vaccum off....

or some sticky tape might work.

I need quality equipment, feel free to donate.

lspker

Silver - Posts: 503

Joined: November 23, 2003

Location: Canada

Posted: December 08, 2003 at 9:13 PM / IP Logged

If the sub is vented at the back, you can remove any screens and GENTLY push the dust cap back out with a long qtip or pencil with an eraser on it. Gently.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Help, I dented my sub

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.