1993 Chevy remote start problem

Home / the12volt's Install Bay / General Discussion / 1993 Chevy remote start problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Ditchdog

Member - Posts: 4

Joined: February 08, 2003

Location: United States

Posted: February 08, 2003 at 4:07 PM / IP Logged

Hello All,

Have an OMEGA RS-7K2 Remote Started Keyless Entry im tryiong to install. I have 1993 Chevy Truck automatic and they said I needed secong ignition relay and i have it but cant figure out how to hook up the extra relay. I also havent hooked into second ignition wire cause im not sure what to hook to it.

OMEGA has not returned emails. The module is not starting or locking/unlocking doors. Valet switch is flashing the parking lights though. Anyone else have similar problems? PLEASE HELP!!!!!

Fred McGuire

Okmulgee, Oklahoma

mrdonedeal

Member - Posts: 4

Joined: February 08, 2003

Location: United States

Posted: February 09, 2003 at 12:14 AM / IP Logged

Hey ,Fred,

I'm not totally sure about this and I'm not at all familiar with OMEGA systems. I belive that you can take the relay and use the ignition wire from the OMEGA system as a trigger for the second ignition. The wire (if present)should be white and should be located in the ignition harness. As far as starting goes, does the system need to be tach learned? Is the door lock system compatible with that of your chevy, i.e. is it a 5 wire, negative trigger, or positive trigger? Hope this helps.

Mr. Donedeal

Ditchdog

Member - Posts: 4

Joined: February 08, 2003

Location: United States

Posted: February 09, 2003 at 7:42 AM / IP Logged

Thanks for the Reply Mr. Donedeal,

I think, but not totally sure, that I have solved the second ignition relay problem. I read the book several times last night and finally figured out what it was saying. I think I left off a wire from that second relay. I'll try it today but I woke up to a snow filled morning here in Oklahoma.

As for the locks they are Reversal Rest at ground system. I have the color codes for both the truck and the system and there could be a possiblity I have them backwards. But I dont think so.

I had to purchase the extra relays for the locks and and extra relay for the second ignition. and i think I just neglected to hook up the second ignition relay correctly. But would that keep the locks from working.

Any advice would help, if the seconf ignition doesn't do the trick.

Thanks Again

Fred McGuire

Okmulgee, Oklahoma

mrdonedeal

Member - Posts: 4

Joined: February 08, 2003

Location: United States

Posted: February 09, 2003 at 8:29 AM / IP Logged

Fred,

If the doorlocks are reverse polarity, then you are going to have to have two relays (one for lock and one for unlock). You are also going to have to cut your door lock wires so that you basically have 4 wires (2 on the door lock switch side and 2 on the car side). If you need more information on how do it, let me know.

Mr. Donedeal

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 09, 2003 at 8:35 AM / IP Logged

| 12V|red |+ |ignition harness |

Notes:

*1 5 wire (type C) on the two door models, and positive trigger (type A) on the four door and keyless entry models. *2 Tach wire on the 6.5 Diesel is white at the instrument cluster. Diesel wait to start wire is dk. blue (+) located at the instrument cluster. *3 ECM located behind the glove box.

Second Ignition relay

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Ditchdog

Member - Posts: 4

Joined: February 08, 2003

Location: United States

Posted: February 09, 2003 at 9:33 AM / IP Logged

I GOT IT To WORK!!!!!

WHO HOOOOO

I hooked up the second ignition and then looked in the book to retrace my steps and on the very last page was instructions to program the remotes, SHEESH I thougt I was going nuts and when I did it. It all works.

Many Thanks to all that replied and God Bless You All

This site is Great

Fred McGuire

Okmulgee, Oklahoma

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1993 Chevy remote start problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.