third brake light

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / third brake light (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dj styles

Member - Posts: 14

Joined: September 27, 2002

Location: United States

Posted: November 12, 2002 at 9:28 PM / IP Logged

how can i wire in a third brake light into a 88 silverado and not have it flash with the signal lights, will i just have to buy the module to keep it from flashing. is there any other way of doing this.

gabriel correa

Player69

Silver - Posts: 504

Joined: October 27, 2002

Posted: November 12, 2002 at 9:36 PM / IP Logged

you need to run a wire right to the brake switch. The wire will be white wire. Check with a DMM it will rest at ground and go +12v when you push the brakes. It could also possibly be yellow. Most likely it is white.

dj styles

Member - Posts: 14

Joined: September 27, 2002

Location: United States

Posted: November 12, 2002 at 10:28 PM / IP Logged

thanks player69, will try it tomorrow.

gabriel correa

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

third brake light

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.