Posted: August 24, 2006 at 1:47 PM / IP Logged
Posted: August 24, 2006 at 1:58 PM / IP Logged
Posted: August 24, 2006 at 2:12 PM / IP Logged
Posted: August 24, 2006 at 2:38 PM / IP Logged
Posted: August 24, 2006 at 2:59 PM / IP Logged
Posted: August 24, 2006 at 3:21 PM / IP Logged
Posted: August 24, 2006 at 9:27 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version

| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com
Wednesday, November 5, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Wednesday, November 5, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.




i want the fogs to come on with the low beams (just tap the low beam power wire)
turns on with the turn signals (just tap the wires)
halos on with the park lamps (just tap the wires)
where can i find what color wire is what? i would like to tap the wires in the engine bay as oposed to the cab so i have less wire to run.
It is a 93 GMC Suburban
behind the park lamp, one bulb has lt blue, brown, black and the other blub has dr blue, brown, black. that is the driver side, i dont know if the pass side is the same or different.....
