radio, 99 tahoe

Home / the12volt's Install Bay / Car Audio / radio, 99 tahoe (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rderosier

Member - Posts: 1

Joined: November 01, 2008

Location: Colorado, United States

Posted: November 01, 2008 at 2:53 PM / IP Logged

Im trying to install an alpine cd player in a 99 chevy tahoe, but I ran into a problem, the ignition/switched power wire doesn't have any power when I turn the key on. I got the wiring harness from crutchfield so its the red wire, and behind the harness its not hot either. Could this be a relay or what? If so, which relay? No blown fuses either.

Thanks

sneakycyber

Silver - Posts: 413

Joined: September 13, 2005

Location: United States

Posted: November 01, 2008 at 3:30 PM / IP Logged

You may have accidently shorted this wire. These are sometimes fused with a fusible link or another fuse location and not the radio fuse. I am not sure of the exact placement of this fuse you could try the fuse box in the engine bay sometimes its there. Otherwise just go to the ignition harness and tap into the brown wire.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

radio, 99 tahoe

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.