the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

unusual noise


Post ReplyPost New Topic
< Prev Topic Next Topic >
atl-dreadz 
Member - Posts: 14
Member spacespace
Joined: September 11, 2009
Location: Georgia, United States
Posted: June 30, 2010 at 12:11 AM / IP Logged  
I have 2 Orion C12D2 subs 200RMS/400Max per sub in a sealed box with a Boss GT 580 2 channel amp.. I got this setup for $50... I have them wired in a 2 ohm load but when I connect them to the bridged channel it wont play but the subs will still move but wont make a sound even when there is no music playing so I have to hook it up to the right channel pair and I dunno how much power it gets but the subs barely move... It has a bass boost switch like an on and off switch so I cant set it and I dunno why when I set the input sensitivty switch to 100Mw-2v its plays louder than the other setting... And when I have the bass boost switch on it makes noises when no music plays... Can anyone tell me whats wrong and I also blew my front door speaker and its stock ran off a Pioneer Premier 390MP headunit is it a way I can set the door speakers and 6x9's to play highs while the subs driven off the amp play the lows... Can someone help me set this up..?? I will try to take pics....
@(^_^)@
atl-dreadz 
Member - Posts: 14
Member spacespace
Joined: September 11, 2009
Location: Georgia, United States
Posted: June 30, 2010 at 12:13 AM / IP Logged  
I meant to say they are C15D2 subs and what kind of amp can I put on them to get best results....
@(^_^)@
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: June 30, 2010 at 12:20 AM / IP Logged  

http://bcae1.com/images/rca/temporaryrcashieldrepair.html

What is the other choice on the switch?  It is supposed to be louder on the 200MV to 1V scale than on the 2V to 8V setting.

atl-dreadz 
Member - Posts: 14
Member spacespace
Joined: September 11, 2009
Location: Georgia, United States
Posted: June 30, 2010 at 7:39 PM / IP Logged  

Yeah thats to two options why is that option louder than the other one.. Also how do I set the low pass filter on the subs do you turn the knob to the number on the left or right to alow more low frequencies in or out..??

30Hz     /         120hz and the subsonic filter how does that work and I have a Pioneer head unit that allows me to turn the high pass filter from 50hz/ 63hz/ 80hz/100hz/125hz which one do I select so it will only let my inside speakers play the highs and cut out the lows...??

@(^_^)@
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: June 30, 2010 at 8:56 PM / IP Logged  

The low pass filter will allow frequencies that are at or below that frequency to be played.  Set to 30, it allows frequencies 30 and below to get to your speaker.  Set to 120, it allows frequencies 120 Hz and below to get to your speaker. 

Subsonic filter is a High Pass filter, it allows frequencies at or above the setting to get to your speaker.  Set to 15Hz, it allows frequencies 15 and above to get to your speaker.  Set to 30Hz, it allows 30 and above to get to your speaker.

The switch by the gain adjustment, when the switch is in the 200Mv to 1Volt setting, this means with the gain all the way up, a 200Mv signal will allow the amp to produce max power.  With the gain all the way down, it will take a full volt to max the amp out. 

With the switch in the other position, it will take 2V to 8V to max the amp out.    So if your deck is a 4Volt deck, when the switch is in the 200Mv to 1V position, you are able to provide 4 times the required signal.  With the switch in the proper position and the gain properly adjusted, you can still max your amp out, and you will have actual control of your system. 

brent w 
Member - Posts: 26
Member spacespace
Joined: June 24, 2010
Location: Montana, United States
Posted: July 01, 2010 at 2:00 PM / IP Logged  
Grent stuff uhhh....idiot.  ˘ľ this site. 
atl-dreadz 
Member - Posts: 14
Member spacespace
Joined: September 11, 2009
Location: Georgia, United States
Posted: July 01, 2010 at 3:45 PM / IP Logged  
Ok I understand that termonology.. I got the specs on the amp its puts out like 200 x 2 @ 4ohms but doesnt say anything bout 2 ohm load and when you bridge it I guess you can only put a 4 ohm load on it right..?? So I have 1 channel pushing the 2 subs in a 2 ohm load would that damage the amp..?? I have 1 cord at the positive and the other at 1 negative and when I take those two wires and hook them up to one subs terminals on the box I have another set of speaker wires running from the 1st subs terminals on the box to the second ones to make the 2 ohm load right or can I hook one speaker to each channel..??
@(^_^)@
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: July 01, 2010 at 7:13 PM / IP Logged  
you should connect one speaker to each channel.
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: July 01, 2010 at 7:20 PM / IP Logged  
How much power does it produce into a 4 ohm mono load?  Divide that number by 2 and that is what it does into a 2 ohm stereo load.
atl-dreadz 
Member - Posts: 14
Member spacespace
Joined: September 11, 2009
Location: Georgia, United States
Posted: July 02, 2010 at 6:35 PM / IP Logged  

On one website it says 500 x 1 @ 4 ohms

@(^_^)@
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer