the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

replacing the mid from my components


Post ReplyPost New Topic
< Prev Topic Next Topic >
souljah972 
Member - Posts: 24
Member spacespace
Joined: September 23, 2006
Location: United States
Posted: November 27, 2010 at 1:49 PM / IP Logged  
I have a set of JL Audio C2's components im using for my front stage with a JL 300/4 but i blew a mid , I was wondering if i could replace the mid range woofers with some D series 2 way pioneer's cause they are all i have right now rather then buy a new set of C2's. They sound really good alone would hooking them up to the jl crossover cancel the pioneers tweeter out?
Live For The Music
haemphyst 
Platinum - Posts: 5,054
Platinum spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: January 19, 2003
Location: Michigan, Bouvet Island
Posted: November 27, 2010 at 2:12 PM / IP Logged  
It may or may not work... Seriously.
It will FUNCTION, guaranteed, but if the impedance curve of the mid is not very close in character to the blown driver, your results will certainly not be optimal.
If you are going to replace, I very highly suggest replacing both of the original woofers (not just one...), and I think your overall results will be much more acceptable.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer