the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

honda accord


Post ReplyPost New Topic
< Prev Topic Next Topic >
rick_21_69 
Copper - Posts: 53
Copper spacespace
Joined: December 30, 2002
Location: Canada
Posted: May 06, 2003 at 9:02 PM / IP Logged  
hi I was wondering if anyone has managed succesfuly to put a kick panel enclosure, or a sealed door pod to house 6 1'2's in a 97 honda accord exr 5 speed coupe? I want to put a my 6 1/2's and a 3 1/2" speaker in a custom enclosure, but the geography doesn't seem to allow it self a realy desirable location. any tips or pics of an enclosure would be appreciated. I know anythings possible. but I want it to look professional, and have a clean transition with the interior. I would prefer to do something with the door, but not modify the door panel too extensively.........thnx
special137 
Member - Posts: 4
Member spacespace
Joined: May 06, 2003
Location: United States
Posted: May 07, 2003 at 6:48 AM / IP Logged  

You could get kick panels fabricated to house the 6 1/2's, but i would recomend you got components to add better imaging.  You don't have much if any play in the tweets in a coax, assuming your 6 1/2's are coax.  All you could do is install them and hope the imaging is ok.

A set of kick panels is a very clean looking spot to mount speakers and look very professional.  But again, I would invest in a component set to install in these rather than just 6 1/2s.  The 3 1/2's could be fitted into the door in any spot you have enough room for them.  I'm not too familiar with the 97 accord doors, so you'd have to find a good spot for them!

rick_21_69 
Copper - Posts: 53
Copper spacespace
Joined: December 30, 2002
Location: Canada
Posted: May 07, 2003 at 4:20 PM / IP Logged  
I do have components. there kicker models. I have good imaging with the tweet on the dash, but need to do something with the woofers
bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: May 07, 2003 at 4:38 PM / IP Logged  
Q-Logic already makes pre fab kick panels for your car. They don’t get any more professional looking then this http://www.qlogic.ws/2003/home just go to the Q forms drop down menu and select your make model and color.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, July 14, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer