sub out (mono)

Home / the12volt's Install Bay / Car Audio / sub out (mono) (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

efrain

Member - Posts: 3

Joined: June 10, 2003

Location: United States

Posted: June 10, 2003 at 1:26 PM / IP Logged

hello i noticed my sony xplode cdx-ca810x has audio + and - out for a sub woofer. i would like to know if i can run a sub woofer to this without a amp. and what size and watts open air or closed i should get prefferably sony. thanks

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: June 10, 2003 at 1:45 PM / IP Logged

No, that's a pre-amp output that is meant to be connected to your sub woofer amp. So, you will need an amp if you intend to connect a subwoofer.

wvsquirrel

Gold - Posts: 1,237

Joined: July 27, 2002

Location: Florida, United States

Posted: June 10, 2003 at 9:33 PM / IP Logged

If they are RCA then they are preouts. There should be 3 sets of them on that headunit (Front, Rear, and Sub). One should be Red, the other White (for Left and Right, not + and -). All 3 sets are 2volts. DYohn is correct, they are for sending a Low Level signal to amplifiers.

Squirrel

"No more Cpt. Kirk chit chat"

If its too loud, then you're too old

Donate to the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

sub out (mono)

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.