Mach 460

Home / the12volt's Install Bay / Car Audio / Mach 460 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ott7283

Member - Posts: 5

Joined: April 12, 2002

Location: United States

Posted: June 27, 2002 at 10:14 PM / IP Logged

I'm trying to add an aftermarket head unit to my '99 Mustang w/mach 460. I have a OEM converter because the deck is high power. Everything turns on, but I can barely hear anything come out of the speakers even after I adjust the converter. I think it's got something to do with the ground for the amps, but I'm not sure. If anyone could help, I would appreciate it.

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: June 27, 2002 at 10:22 PM / IP Logged

Check the wiring on the hi to low converter. Are you using the factory Amp?

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: June 27, 2002 at 11:44 PM / IP Logged

bberman1 is right, make sure that you are taking the signal after the amp for the converter, not after the deck in the dash.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

ott7283

Member - Posts: 5

Joined: April 12, 2002

Location: United States

Posted: June 27, 2002 at 11:59 PM / IP Logged

I'm trying to use the factory amps. I'm using a High Power Line Output converter and it says to install it after the deck. In fact, it has a wiring harness that plugs right in the factory wiring harness. The connections seem to be OK.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Mach 460

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.