power tapping 2003 dodge

Home / the12volt's Install Bay / Car Audio / power tapping 2003 dodge (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

kudruggist

Member - Posts: 2

Joined: June 23, 2003

Location: United States

Posted: July 03, 2003 at 8:51 AM / IP Logged

I need to tap into the RED / white wire on the radio harness to power XM radio. What is the best method? Thanks

Greg Russell

Sweekster

Silver - Posts: 481

Joined: May 13, 2003

Location: United States

Posted: July 03, 2003 at 10:18 AM / IP Logged

You could probably try a wire tap in. That way you aren't actually having to cut the wire.

esmith69

Gold - Posts: 1,511

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 26, 2002

Location: United States

Posted: July 03, 2003 at 11:16 AM / IP Logged

Remove about 1 inch of insulation from the wire you want to tap in to; then take your power wire, twist it around the wire you're tapping in to, and solder. Finish by wrapping with some electrical tape

Ethan

-----

"Patience, persistence, and perspiration make an unbeatable combination for success"

Donate to the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

power tapping 2003 dodge

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.