Is it better to tap in before/after amp?

Home / the12volt's Install Bay / Car Audio / Is it better to tap in before/after amp? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Dry Heat

Member - Posts: 2

Joined: July 05, 2003

Posted: July 06, 2003 at 6:08 PM / IP Logged

I have a 2003 Hyundai Santa Fe with a factory Monsoon (single CD) h/u and a Delphi amp under the front passenger seat. I am adding an amp and some speakers from my prior vehicle. I have a high level to low level converter before my aftermarket crossover and amp. Is it better to tap into the wires between the h/u and the amp or into the wires running out of the amp to the speakers?

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: July 06, 2003 at 6:26 PM / IP Logged

You will want to tap the wires after the factory amp.

Dry Heat

Member - Posts: 2

Joined: July 05, 2003

Posted: July 06, 2003 at 6:41 PM / IP Logged

Excellent.....thx. much bberman.

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: July 06, 2003 at 8:09 PM / IP Logged

not a problem Is it better to tap in before/after amp? -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Is it better to tap in before/after amp?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.