amplifier wiring

Home / the12volt's Install Bay / Car Audio / amplifier wiring (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

l7sdime

Copper - Posts: 55

Joined: July 26, 2003

Location: United States

Posted: July 30, 2003 at 11:43 AM / IP Logged

ok i have decided instead of goin with 4 l7's and walling my truck off i am going to go to three l7 12's and a kx1200.1 for two and a kx600.1 for the other. i can put more wattage to eahc (about 600) and i can probably get louder with this setup. Im putting 3.25 cu ft of airspace for each one. thats 10.25 cu ft total. how should i wire the speakers?? the 12001 is stable at 1 ohm and the kx 600.1 is stable at 2 ohms. is this gonna cause a difference in frequencies they play at i.e. the one l7 will play a higher bass or what?? should i get the 4 ohm or 2 ohm dvc subs? any suggestions will help thanks.

wes

Special-K

Member - Posts: 43

Joined: June 02, 2003

Posted: July 30, 2003 at 11:45 AM / IP Logged

Get the 2ohms. You can run 2 ohm or 1 ohm with those. That way later in the furture, u can run 1 ohm to all of them. I don't know about mixing that up though. Let me check with some freinds.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amplifier wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.