Anybody have experience with quad coils?

ok heres the deal i Have 2 audiobahn awis15" quad coil woofers {2000 rms 4000 max each} and 1 earthquake d3  amp{3000 watts at 1 ohm, 5-6000 watts at .5 ohm } i need to know how to make jumper wires stick together and exatly how to make them i dont know what to  do solder the wires, make two wire fit into one terminal but wouldi have to use smaller wire or can i use wire that can handle5000 watts and doubdle it up in the terminal i gave 4 - .4+ on just one woofer i know how to wire them in parallel but im notr sure about jumper wires at all any info is good info i hase spring loaded terminals [:errr:]" all i can hear is a ringingin my ears turn down the volume"{turns down volume} he says what do you think of my system? " WHAT!!!??!??" he laughs and smles and says i guess its not loud enough ehh???

since you have the two qvc you will only be able to run the amp at 1 ohm, what guage wire are you planning to use for speaker wire?Quad L Handyman services

whats the ohm load on each coil?

i talked to audiobahn and they said 10 guage wire should be good i need it to hold bout 3000 watts max.  WHY can i ONLY runi the amp  at 1 ohm?? each voice coil is 3" 2 ohms if you want more stats on my woofers go to http://www.audiobahninc.com look up the immotal series awis 15 is quad coil,  awisd is dual vc   i would really like to know why just one ohm??? doesnt make sense " all i can hear is a ringingin my ears turn down the volume"{turns down volume} he says what do you think of my system? " WHAT!!!??!??" he laughs and smles and says i guess its not loud enough ehh???

i plan on running them parallel series parallel with a earthquake ph d3 amp" all i can hear is a ringingin my ears turn down the volume"{turns down volume} he says what do you think of my system? " WHAT!!!??!??" he laughs and smles and says i guess its not loud enough ehh???

that will give you a 1ohm load, i still dont understand your original question tho?Quad L Handyman services

my original question IS WHY CANT I RUN IT AT .5 ohms????????????" all i can hear is a ringingin my ears turn down the volume"{turns down volume} he says what do you think of my system? " WHAT!!!??!??" he laughs and smles and says i guess its not loud enough ehh???

oh i thought it was about the "jumper cables"? the reason is because you have 8 2ohm voice coils, you can look on any page and i really dont think you will find a way to wire them in .5ohm with just the two subs.Quad L Handyman services

si if i have an amp saet at  1 ohm and a paralell series parallel wiring on those two subs i cant switch the amp to .5 ohms??????" all i can hear is a ringingin my ears turn down the volume"{turns down volume} he says what do you think of my system? " WHAT!!!??!??" he laughs and smles and says i guess its not loud enough ehh???