mustang mach460 stereo system

Home / the12volt's Install Bay / Car Audio / mustang mach460 stereo system (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mxxmikexx

Silver - Posts: 796

Joined: September 18, 2002

Location: United States

Posted: March 28, 2004 at 4:09 PM / IP Logged

what do i need to do in order to change the head unit in a mustang with the mach 460 system? can i simply do it with a metra 70-5510 harness? and just feed the low level from the new head unit to the factory ford amp?

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: March 28, 2004 at 5:25 PM / IP Logged

Well you can either by-pass that amp..or you can re-wire the whole car.

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

mxxmikexx

Silver - Posts: 796

Joined: September 18, 2002

Location: United States

Posted: March 28, 2004 at 5:34 PM / IP Logged

so you cant feed low level from an aftermarket head unit into the factory amp?

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: March 28, 2004 at 8:18 PM / IP Logged

The Metra 5510 harness uses the 8-pin rectangular gray plug for the head unit's power supply and RCAs going to a square black plug for the audio output, am I correct?

If that's the case then you should be able to run the low level into the factory amp without any problems.

Search for other posts by chriswallace187

davedyer79

Copper - Posts: 178

Joined: February 18, 2004

Location: United States

Posted: March 29, 2004 at 9:58 AM / IP Logged

If you want to be absolutely sure, do a profile for the member MetraTech. He is tech support for Metra, and probably knows more about harness's than anyone else. Good luck

davedyer79

momo stallion

Member - Posts: 6

Joined: March 27, 2004

Location: United States

Posted: March 29, 2004 at 11:29 AM / IP Logged

i have an 02 mustang gt that HAD the 6 disc. i had bought two metra peices, one i had to order... i tied in like normal then i have another harness that allowed me to use my front and rear preouts. i dont know what they are anymore i have removed the 460 now.

momo stallion

Member - Posts: 6

Joined: March 27, 2004

Location: United States

Posted: March 29, 2004 at 11:29 AM / IP Logged

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

mustang mach460 stereo system

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.