Speaker Adapters

Home / the12volt's Install Bay / Car Audio / Speaker Adapters (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

four door

Member - Posts: 6

Joined: February 11, 2004

Location: Albania

Posted: April 09, 2004 at 1:30 AM / IP Logged

Doing an amature install and have no idea where to start looking for an item. The cutouts for the speakers are 4.5" and the speakers are 4" which leaves a small gap. I was wondering if a company makes a mounting plate that would add some width to the edge of the speaker frame. Any assistance would be greatly appreciated. Four Door.

four door

speedwayaudio1

Silver - Posts: 879

Joined: March 18, 2003

Location: United States

Posted: April 09, 2004 at 1:59 AM / IP Logged

make one your self. use 1/4 plywood. cut out the 4.5 hole drill mounting holes in it. then cut out the 4" hole in the center. drill your speaker mounting holes. easy. If you have a rotozip its real easy. I like the rotozip better than a router. make one out of thin card board first, and use it as a template.

Big Dave

Search for other posts by speedwayaudio1

aggie altima

Silver - Posts: 298

Joined: July 25, 2002

Location: United States

Posted: April 09, 2004 at 6:26 AM / IP Logged

not sure what car it is... seeing that you are in Albania. Check www.crutchfield.com, and see if they have your make and model. If they do, they most likely have your adaptor. I got some adaptors from them for my 2000 Nissan Altima 6 3/4" holes which will fit a 6 1/2" speaker.

Jon

Don't like rockford subs? Then don't look at my car =)

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Speaker Adapters

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.