Alpine mrv-f450, DVC?

Can I run a dual voice coil subwoofer on my Alpine MRV-F450? I've searched around but can't seem to come up with a good answer. The manual for the amp is useless too. I used to have an SVC Cerwin Vega, some how I blew that one up and now I need a new sub. I'm looking for a new sub, but if I'm going to spend the money again I want something good - need's to be an 8 inch though, Std. Cab S10.

Here are the specs for it:

• 50 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms
• 60 watts RMS x 4 at 2 ohms + 200 watts RMS x 1 at 4 ohms
• 120 watts RMS x 2 + 200 watts RMS x 1 in bridged mode
• 2-, 3-, 4-, or 5-channel output
• Tri-Way capable
• Bass Engine® features:
• Front and rear channels have variable 50-200 Hz high-pass/low-pass crossovers, 12 dB/octave
• Sub channel has a 30-200 Hz low-pass crossover, 12 dB/octave
• Selectable (15 Hz or 30 Hz) subsonic filter on the sub channel
• Tuned Bass EQ (6 dB bass boost at 50 Hz with adjustable Q factor, while frequencies below 30 Hz are cut by 6 dB) on the sub channel
• MOSFET power supply
• STAR Topology (minimizes internal noise and prevents ground interference)
• Oversized power and ground connections
• Gold-plated screw terminals
• Top-mounted controls with cover
• Detachable front cover
• Blue power LED
• 16-9/16"W x 2-3/8"H x 11-13/16"D (depth is 10" with front cover removed)

Any help would really be appreciated,

Ben

Thank you both for your replies. I really appreciate it.

Any suggestions on an 8 inch sub that would sound good with this amp? I don't expect it to pound, but sound quality is more what I'm after.

Thanks again,

Ben