Mid Bass

Home / the12volt's Install Bay / Car Audio / Mid Bass (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

need2knowalot

Member - Posts: 1

Joined: October 06, 2004

Location: United States

Posted: October 06, 2004 at 8:37 PM / IP Logged

I do not know a lot about car audio but I have 2 8 in subs pushed by a Phoenix Gold 350 and 2 6 in subs with a Kenwood 250. Is there a way to only send the low bass to the 8's and the highs to the 6's? I know maybe it is a dumb question but i "need2knowalot".

Thanks for your help...

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: October 06, 2004 at 11:36 PM / IP Logged

well if you have a crossover on each one of your amps you would set the pG to LPF and the other amp to HPF if you dont have this option you might have a sub out on your deck you would run that to your PG.. if not, then you could purchase a EQ to seprate your frequency's and run your rca's from that to each amp

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

italnpimp59

Silver - Posts: 427

Joined: August 26, 2003

Location: United States

Posted: October 07, 2004 at 1:15 AM / IP Logged

an external crossover is the way to go. you can set the cut off frequency to the 6in subs, and the 8in subs. you dont want two different size subs playing the same frequency because it will cause cancellation

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Mid Bass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.