the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

88 Honda Prelude Radio Install


Post ReplyPost New Topic
< Prev Topic Next Topic >
razorbacx 
Copper - Posts: 91
Copper spacespace
Joined: June 08, 2003
Location: United States
Posted: December 11, 2004 at 10:05 AM / IP Logged  

I have a friend that is wanting to install an aftermarket radio, Pioneer DEH-P550MP, into his 88 Prelude and before we begin I was hoping to locate some details on how to remove the existing radio. Any assistance would be greatly appreciated.

Thanks,

Razorbacx

GSR Jay 
Member - Posts: 11
Member spacespace
Joined: June 20, 2002
Location: Canada
Posted: December 11, 2004 at 10:15 AM / IP Logged  
I used to own an '88 Lude. If I remember correctly you have to remove the trim piece that surrounds the radio and climate control area. I think that there are two screws underneath the vents and the rest snaps in with clips. Make sure you double check that there aren't any more screws that need to be removed because I'm not 100% sure.
With the trim piece out of the way you'll see that there are 4 screws that bolt the radio into place. You'll also have to loosen a screw on the bottom of the radio at the very back of the unit. Honda uses a rear bracket to stabalize the radio and many people forget to loosen this bolt and wonder why their radios won't come out.
Hope this helps.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer