the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Need pin outs for Explorer subwoofer out


Post ReplyPost New Topic
< Prev Topic Next Topic >
Victorbmw 
Member - Posts: 15
Member spacespace
Joined: October 21, 2004
Location: United States
Posted: January 14, 2005 at 7:50 PM / IP Logged  

I need to know pin outs for out put on the 2002 explorer radio and for navigator 20043 radio

  Any help will be appreciated.

Need pin outs for Explorer subwoofer out -- posted image. victorbmw
rolln_on_em 
Member - Posts: 21
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: August 07, 2004
Location: United States
Posted: January 15, 2005 at 12:41 PM / IP Logged  

if the rear of the radio has a small 8 or 8 pin plug then I remember RED / black being turn on, and the other two signal wires, you do not need to hookup the uninsulated wire.

If all else fails just remove rear quarter panel to check for wirecolors to factory amp.

Also remembver to use atleast a 570ohm resistor on your turn on lead, to avoid turn on pop.

Hope this helps

Bryan

Yeah I drive a slow car; but damn it looks good
Victorbmw 
Member - Posts: 15
Member spacespace
Joined: October 21, 2004
Location: United States
Posted: January 31, 2005 at 8:40 PM / IP Logged  
Thanks Bryan for your help  It sounds real good !
Need pin outs for Explorer subwoofer out -- posted image. victorbmw

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer