Posted: January 27, 2005 at 3:37 PM / IP Logged
Posted: January 27, 2005 at 7:29 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version

| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com
Tuesday, November 11, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Tuesday, November 11, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.





Remove the door handle bezel from the door panel.
Release the upper extension by pulling outward on the front edge in order to release the upper retainer clips.
Remove the upper extension from the trim panel by lifting up and out.
Using a suitable flat bladed tool, gently pry the manual lock lever from the door trim panel.
Remove the trim panel screws
• Remove the screw (2) from within the opening where the manual door lock lever resides.
• Remove the screw (3) from the opening in front of the armrest.
Carefully slide the trim panel up in order to release the retainers from the door.
Disconnect the electrical connectors.