Opinion on the dayton Titanic 15 MkIII

Titanic 15" MkIII, i would like to no how this sub proforms and if it is worth the money. im really considering geting it but i would like an opinion on it. also like to now what box it proformes better in, i know that it has to be big. this is the site im probebly going to get it from. if enybody knows a site i can get it cheaper with the same or better warranty. the site sez that the box sould around 5 cu ft and tuned to 19.6Hz. dose dayton make good subs and are they reliable on there rms ratings. is it worth it for me to get it. if somebody could put the specs of the sub from the link into a box building program to tell me what it sould proform better in. gust give me what you find works best. i want it to be ported. thanks for your help AaronWant to know some good equipment- JL,Adire Audio,Mcintosh,Brax,Helix,Eclipse,JBL,RE,Dimoand Audio,Zapco, pritty much anything DYhon,Forbidden recommend

On the12volt you give some info and you get in

ya i know im going to put it in my room thanks stevWant to know some good equipment- JL,Adire Audio,Mcintosh,Brax,Helix,Eclipse,JBL,RE,Dimoand Audio,Zapco, pritty much anything DYhon,Forbidden recommend

On the12volt you give some info and you get in

and, yeah... GREAT woofers, especially for the money! I still use a pair on Titanic 12 MKI from, like 8 years ago, in my home system. Flat to 25 in 2.2 cubes... And I BEAT them to death, with an Adcom GFA565 at 350wpc... Awesome woofers, and excellent SQ as well.It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

can i make my own amp im looking for one but dont want to spend the money could i make my own for cheaper i would like to learn about this but if it is better to get one than ill go ahead and get one. iv bine looking at the adcom's and they look pritty good. i still want to power this thing to its rms. i have a computer that is hooked up to a receaver then it gose to an amp then to the sub that i have now it is being run at 2 ohms so it gets really hot and so i have fanes on it to keep it cool but i now im really wareing it out by doing that. and the computer and the reciver put alot of power through it to so is not runing its rms 110 more like 250, 320w. so i need to be able to get something or make it so it is able to take that much form the input. i saw that the adcoms 350's are able to take 630w into the input. actuly that was an rythmik audio amp that seid it was able to thake 630w from the input. if enybody could help me find something that is good and at a good price or help me make one or help me find out how to do it i would be really thankful. P.S i would like to run the sub at its rms 800w so i need a pritty strong amp like 500 to 700wrms. thank you much in advance. Aaron Want to know some good equipment- JL,Adire Audio,Mcintosh,Brax,Helix,Eclipse,JBL,RE,Dimoand Audio,Zapco, pritty much anything DYhon,Forbidden recommend

On the12volt you give some info and you get in

Aaron, if your room was in my house I think I would begin to worry a bit.Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

haha ya i think the walls in my room dont like me mabe not that strong but you now i gust want an amp that isent going to get that hot cuse it GETS HOT i have two fans on it and that dose the trick but i need a larger amp to handel the power but hay i like music what can i say and what do you mean you would get worryed am i going to overload a cercate i dont think i will, i dont want that much power i gust want something that is able to handle the load that is put on it. and not have to worry about it geting to hot. im realy inthusiastic about this stuff beacause this is the first thing that i have been able to stick to, everything else gust kind of went away but this im EXTEREMLY interested in everything that has to do with audio and i mean enything from home speakers to car audio to all electronics that have to do with it i really would like to get involved in this stuff. it makes me happy to finesh something that ive been working on for a long time and have it turn out good it is really satisfying i also love to help people and learn stuff i cant get anophe of it. i dont know what you do it for but that is what i do it for. there arent that meany people that i now that like to do this stuff like i do. so this is were im able to realate about what i like. ive learned more then i ever thought posible from you and other people on this forum and other places. hear there is always somebody to help so i like doing the same. enyway i think that im fine tell i think that the amp souldent be punised anymore i would really like to take the wight of it and put it on something that is more capable of takeing the job on if you have eny advise or if enybody has anything to help thanks AaronWant to know some good equipment- JL,Adire Audio,Mcintosh,Brax,Helix,Eclipse,JBL,RE,Dimoand Audio,Zapco, pritty much anything DYhon,Forbidden recommend

On the12volt you give some info and you get in

there are no twisted wires they are all cover in a heat shrink covering so there is nothing to worry about agen there are no expesed wires.Want to know some good equipment- JL,Adire Audio,Mcintosh,Brax,Helix,Eclipse,JBL,RE,Dimoand Audio,Zapco, pritty much anything DYhon,Forbidden recommend

On the12volt you give some info and you get in