Kenwood KAC-7201 Not Working?

Home / the12volt's Install Bay / Car Audio / Kenwood KAC-7201 Not Working? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bordominc

Member - Posts: 1

Joined: March 05, 2006

Location: United States

Posted: March 05, 2006 at 7:53 PM / IP Logged

I just bought a used kenwood kac-7201. I hooked everything up, the fan comes on, and a blue light flashes, however, no sound came out. After searching forums, I found that the blue light is a circuit protector. I'm not sure whats wrong with it...I know my rca cables are fine as I had another amp wired before this one. I took the amp a part and nothing appears to be burned. Anyone know what it could be?

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: March 06, 2006 at 6:50 AM / IP Logged

First check the speakers/wiring. You may have too low an impedance (ohms) connected to the amp. This could be caused by the speakers, or maybe a wire is shorting to ground. If you can find a manual, it will say what the amp can safely handle.

My ex once told me I have a perfect face for radio.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Kenwood KAC-7201 Not Working?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.