surround sound

Here's the goods:     Sony cdx-gt805dx HU     Sony mex-r5 in dash DVD player     15" monitor glassed in dash     MTX thunder.7804 4 channel amp wired to     Four MTX tx6001 component sets in 2ohm stereo     MTX thunder.92001 mono amp to     2 MTX t9512-44 subs at 1ohm now the problem:     I want to buy one more tx6001 component set and run     one for front center and one for rear center off of a            thunder.8502 at 4ohms. Does anyone make a surround           decoder(is that what it is called?) that will let     me run through all of my amps(6.1)? Mazda 323 GTX +

330 lbs. glass +

4, 5 gallon buckets resin +

1600w RMS @ 1ohm = 162.3db

not sure about 6.1. havent heard or seen any through my store. i know alpine and clarion make ones for 5.1 but not 6.1. Use both of them and get creative and make a BIG center channel. seems your pretty handy with fiberglass.....;)2007 Acura TSX

SQ setup in the works

I have not been able to find any true 6.1 surround processors yet.   But the real question is do you have a true 5.1 headunit....otherwise you wont be making the signal needed anyways Alpine does make headunits for 5.1 as well as a processor, they can be connected via a fiber optic connection.   The shocker is, the lowest headunit with the DTS and 5.1 is roughly $450, and the processor is just slightly less at $350 We are planning on running both items in our next project vehicle, and they are sitting in the pile of equipment waiting to go in. We have 6 amps to power everything Front Mid Kicker ZR600 Front High Kicker ZR600 Rear full-range Kicker ZR240 Center Kicker ZR120 sub amp Kicker XS100 sub amp Kicker XS100 Everything will be controled thru the alipne units Via a 7.2 in touchscreen in the dash Lots of money and work to achive true 5.1 surround. But alpine and some other companys make 5.1 setups that will simply plug and play with thier amps from the headunits2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

That is what I need to know. The Sony DVD player does not decode 5.1. The problem is that I do not want to use a different HU. I want to keep the Sony HU. I need a way to decode 5.1 with preamp outputs for all channels. I already have a monitor in my dash and I still want to use it. Mazda 323 GTX +

330 lbs. glass +

4, 5 gallon buckets resin +

1600w RMS @ 1ohm = 162.3db