dose this set up look right?

Home / the12volt's Install Bay / Car Audio / dose this set up look right? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

m3xciao6

Member - Posts: 18

Joined: June 15, 2005

Location: United States

Posted: May 12, 2006 at 10:32 PM / IP Logged

dose this model look correct im tryin to install a deck directly to a batter dose this set up look right? -- posted image.

dose the turn on wire need to run all the way to the battery?

ferretvw

Copper - Posts: 188

Joined: September 29, 2005

Location: Pennsylvania, United States

Posted: May 12, 2006 at 10:42 PM / IP Logged

Few things the turn on or ACC wire should be the red one and the constant 12V should be your ground (most of the time with an aftermarket deck anyways) this will work if you are trying to keep the radio on constantly but if you want it to turn off with the ignition then the red wire or ACC needs to go to a switched ACC wire, or a wire that is 12V when the key is in the ACC position. Also, 10 guage wire will work but you can go smaller if you wish most decks only require 10-15 amps and that can be supplied with a 16 guage primary wire if you wish, fused of course. and, lastly if you run the wires to two seperate places make sure they are both fused correctly. hope this helps.

forbidden

Platinum - Posts: 5,353

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: May 13, 2006 at 2:36 AM / IP Logged

STOP THE BUS!!!!!

Sounds like you may have an Alpine cd player. You have 3 main wires to think about here, do not confuse them.

Yellow wire - +12v constant direct to battery, fused within 18" of battery.

Red - +12v ignition, this turns the deck on when your car is on.

Black - ground.

The other wires that you may be confusing yourself with (or maybe just me).

Blue - +12v power antenna output wire to turn on a power antenna when you listen to the radio.

Blue / White - +12v remote on to turn on an outboard amplifier or eq etc. This has nothing to do with turning on a cd player or going to a battery at all.

Top Secret, I can tell you but then my wife will kill me.

m3xciao6

Member - Posts: 18

Joined: June 15, 2005

Location: United States

Posted: May 13, 2006 at 9:11 AM / IP Logged

dose this set up look right? -- posted image.

dose this solve my problem i ran both wires to the battery (fused them both) put a switch in the 12v ignition & then grounded it

ferretvw

Copper - Posts: 188

Joined: September 29, 2005

Location: Pennsylvania, United States

Posted: May 13, 2006 at 10:13 AM / IP Logged

oops i meant the constant 12V should be yellow not ground. Anyways, yeah that second diagram is better, what are you using this for? is it going in a vehicle? If so there should be a switched wire behind the radio already same with the constant 12V some more info and we can be a little more helpful I think.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dose this set up look right?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.