mtx 9500-44 vs. R.F. X7 amp

Home / the12volt's Install Bay / Car Audio / mtx 9500-44 vs. R.F. X7 amp (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

damiank

Member - Posts: 2

Joined: July 07, 2006

Location: Canada

Posted: July 07, 2006 at 11:34 PM / IP Logged

Would I be able to push two mtx 9500-44 (dvc) in a Sledge Hamer (SLH-T7512X2-A I killed these subs and want to replace 'em) w/ a Rockford Fosgate X7???? The amp is rated @ 1500 rms @ 2 ohm. So if I wire the subs up with voice coils wired in series, speakers wired in parallel I shuld be able to make this work!...???? Right?

Thanks D.K.

coppellstereo

Silver - Posts: 785

Joined: November 21, 2005

Location: United States

Posted: July 08, 2006 at 12:05 AM / IP Logged

I'm so confused.

Did you kill the amp or the subs?

What is the impedence of the subwoofers you want to use, their power rating, and the power rating of the amp in which you are going to use?

damiank

Member - Posts: 2

Joined: July 07, 2006

Location: Canada

Posted: July 08, 2006 at 12:30 AM / IP Logged

Sorry!

I killed the two MTX 7500 (12" 4 ohm svc) in my Sledge Hamer SLH-T7512X2-A, with a Rockford Fosgate amp (X7, 1500 wats rms @ 2 ohm). The amp is still good to go. The subs are toast.

I want to stick two MTX 9500-44 in the same box and run the same amp. But the subs I can get a deal on (yes off e-bay) are 4 ohm dvc. witch wire down to 4ohm or 1 ohm (right?) Will my Rockford Fosgate Mono db amp push them?

Thanks D.K.

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: July 08, 2006 at 12:55 AM / IP Logged

the mtx subs the 9500's ratings are over 1500 per sub, and on top of that the box sizes for the 7500 and 9500's are diffrent.

my recommendatiuon, build a box to spec for 1 9500 and then run it on the rockford amp, it should be much better then the 2 7500s if built properly

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

mtx 9500-44 vs. R.F. X7 amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.