Speaker wiring test

Home / the12volt's Install Bay / Car Audio / Speaker wiring test (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jcaimhigher

Member - Posts: 11

Joined: January 13, 2003

Location: United States

Posted: January 13, 2003 at 9:20 PM / IP Logged

Is there a way to test the speaker leads from the radio at the speaker in the doors? Basically, what would we want to test with the voltmeter? 120v range or?? I think the speakers may be wired wrong, not terrible sound, just a feeling after the new deck was put in...kinda hard to remove.

Thanks for the input!!

John

jcaimhigher@ixpres.com

Bond of the Blue Beret

jsitterly

Member - Posts: 1

Joined: March 12, 2003

Location: United States

Posted: March 15, 2003 at 8:54 AM / IP Logged

check the polarity off your speaker with your ohm meter then go to wireing color codes of your vehicle match + w+ - w- .if the speaker does a inword pull you have th - and + possitiv reversed if you dont know were un hook one speaker at a time until you find your reverse wire dont forget to mark the wire you have wrong with a piece off tape so the next installer doesent experience the same problem...

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Speaker wiring test

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.