no power

Home / the12volt's Install Bay / Car Audio / no power (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rotten

Member - Posts: 5

Joined: January 26, 2003

Location: Canada

Posted: January 27, 2003 at 2:01 PM / IP Logged

ive just hooked up new head unit in a 95 ford windstar and poof--- no power, all conections are made properly, fuses not blown, does anyone have a solution?

rotten

brianh

Silver - Posts: 516

Joined: August 25, 2002

Location: United States

Posted: January 27, 2003 at 2:33 PM / IP Logged

Have you checked the fuses in the vehicle? Brian

ViperATC5

Copper - Posts: 202

Joined: January 17, 2003

Posted: January 27, 2003 at 6:02 PM / IP Logged

check 12v, switched 12v and ground- if all three are fine, its a problem with the radio

brianh

Silver - Posts: 516

Joined: August 25, 2002

Location: United States

Posted: January 27, 2003 at 6:37 PM / IP Logged

Be sure to ohm out all the fuses in the head unit. You might have gotten a bad fuse. Somtimes they break to the left or right and you cant tell by just looking at them. If you check them with a meter and they read ok I would also agree that you have a bum unit. Good luck. Brian

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

no power

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.