the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

need to create a gwr relay


Post ReplyPost New Topic
< Prev Topic Next Topic >
thefranchise 
Member - Posts: 41
Member spacespace
Joined: August 22, 2002
Location: United States
Posted: December 28, 2007 at 9:03 PM / IP Logged  
Using a RS1905 on an Infiniti I35. it only has a single output trigger that is programmable to function as either a GWR (-) or as a starter kill/anti-grind. I need the anti-grind circuit as the car will slightly grind when the key is put in after a remote start. However I need a GWR to trigger my iDatalink. I think there would be a way to create a relay (prob using two relays) and utilze the (-) Disarm trigger to provide a ground to another relay and energize a relay for GWR to the bypass unit.
Help appreciated!
519civiconair 
Copper - Posts: 50
Copper spacespace
Joined: October 30, 2007
Location: Ontario, Canada
Posted: December 28, 2007 at 11:38 PM / IP Logged  

use Ign. to trigger a relay sending a (-) to the idatalink so 86-Ign. 85+87-(-) ground 30-iDatalink

hope this helps

F.B.S.S air ride is the only way to roll
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: December 29, 2007 at 12:09 AM / IP Logged  

yeap you can use ignition to turn on the bypass. the only issue is, some cars, the immobilizer must be on before ignition turns on.so as civc mentioned

85 - Ground

86 - ignition
87 - ground
30 - to bypass.

the only  issue with this setup is, the idatalink will always be activated when you use the key. (since ign turns on). your unit should have a dedicated ground when running and a starter kill. btw, did u you know the anti grind is suppose to be your ground when running? starter kill only works when the car is armed. i would recomend just setting your unit to do GWR and wire it up like so.

85 - GWR

86 - Ignition (+)
87 - not used
87a - starter key side
30 - starter motor side.

you loose the starter kill (unless you have dedicated outputs, diode isolate GWR and ground when armed) but the anti grind will work when remote start has been activated. and you can also connect the GWR to your idatalink.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer