Need help Again.

Home / the12volt's Install Bay / Car Security and Convenience / Need help Again. (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Anthony1

Copper - Posts: 62

Joined: February 18, 2003

Location: Canada

Posted: February 27, 2003 at 5:50 PM / IP Logged

Everything is hooked up for my led scanner I connected the red wire to constant 12 volt, the black to a ground, and the yellow to the orange wire on my rattler 300 (- 500ma when armed only), but the led will not shut off. When I arm the alarm it will just light up, and stay lite-(no flash patter), when not armed still stays lite but will go through the patterns. Anyone know what I did wrong?????

jayts95

Copper - Posts: 150

Joined: April 24, 2002

Location: Michigan, United States

Posted: February 27, 2003 at 5:58 PM / IP Logged

you will need to add a diode on the orange wire. cut the orange wire place a 1 amp diode in line with the stripe side of the diode facing the alarm side. Now connect your yellow wire from your led to the orange wire (ground when armed) between the diode and the alarm. This should take care of your problem.

Anthony1

Copper - Posts: 62

Joined: February 18, 2003

Location: Canada

Posted: February 28, 2003 at 5:35 AM / IP Logged

okay thanx!!! what will this do? The stripe will be closer to the alarm? I am not very good with this stuff. Sorry.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Need help Again.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.