the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

dei 1041 document anyone have?


Post ReplyPost New Topic
< Prev Topic Next Topic >
mrcllusb 
Copper - Posts: 489
Copper spacespace
Joined: September 06, 2005
Location: Georgia, United States
Posted: May 06, 2008 at 12:10 PM / IP Logged  
I searched and tried the already posted links,but none of them worked.I want my 50.5x unlock to work just like my oem.One push unlocks drivers door,two pushes unlock all others.I understand the green and blue doorlock harness on the brain,and the light blue in H2/1 is the 2nd(-)unlock output.So i'm trying to understand how i would wire this up.In my directwire for my 07 Milan it list as follows
Power Lock-gray / YELLOW
Power Unlock-PURPLE / gray
Lock Motor-gray/brown 5wi
Unlock Motor-blue/green 5wi
"ole blake"
Big Dog 
Gold - Posts: 1,265
Gold spaceThis member consistently provides reliable informationspace
Joined: May 02, 2002
Location: Quebec, Canada
Posted: May 06, 2008 at 1:12 PM / IP Logged  

Here is the 1041.

Lock Gray / YELLOW (9) In Driver's Kick Panel or SJB Conn. C Pin4 (3) Negative

Unlock  PURPLE / Gray (9) In Driver's Kick Panel or SJB Conn. C Pin10 (3) Negative

Driver Door Unlock  Blue/Green At SJB Connector E Pin 27 (5) Reverse

SJB (Smart Junction Box) under driver's side dash.

dei 1041 document anyone have? -- posted image.

Prepare your future. It wasn't the lack of stones that killed the stone age.
mrcllusb 
Copper - Posts: 489
Copper spacespace
Joined: September 06, 2005
Location: Georgia, United States
Posted: May 06, 2008 at 2:00 PM / IP Logged  
Thanks BigDog your a life saver.Okay just got finished looking at the progressive wiring diagram,but i'm still a little fuzzy.I already know i don't need any relays or diodes for my particular vehicle.I'm looking at it like this-
Green from 50.5x-gray / YELLOW(lock wire)
Blue from 50.5x-blue/green(drivers door only)
light blue from 50.5x-PURPLE / gray(unlock wire)
My question is this,there is nothing in the programming that shows me for sure that the light blue only works on a double pulse from the remote,so is it just designed this way? I noticed also that my lock/unlock is (-),but it says the driver door unlock only is reversing in your SJB diagram there.Why would Ford design a system that way? So if i want to do the drivers door priority i will need to do the 2 Relay setup or use a 451M?
"ole blake"
Big Dog 
Gold - Posts: 1,265
Gold spaceThis member consistently provides reliable informationspace
Joined: May 02, 2002
Location: Quebec, Canada
Posted: May 06, 2008 at 3:01 PM / IP Logged  

Green from 50.5x-gray / YELLOW (lock wire) use relay if it locks intermittently.

The light blue from the three pin harness of 50.5X goes to the drivers door as described below whereas the H2/1 goes to PURPLE / gray to unlock the other doors - use relay if it unlocks intermittently.

To do the drivers door, you need to cut the blue/green and send a positive trigger towards the drivers door using a relay. See page 21 of doc 1041.

Prepare your future. It wasn't the lack of stones that killed the stone age.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer