the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

dei xk01


Post ReplyPost New Topic
< Prev Topic Next Topic >
nbcadillac 
Member - Posts: 17
Member spacespace
Joined: June 17, 2008
Location: Pennsylvania, United States
Posted: September 10, 2008 at 4:07 PM / IP Logged  
i installed a compustar 2 wshled-s 2-way remote start on a 01 cadillac deville dhs and used the dei xk06 for the door locks and a dei xk01 for the passkey 3. the copmustar and the xk06 work fine my problem is the xk01. after hooking it up when i plug it in the led is susposed to turn on for 2 sec then go off. well the led just stays on. it has been flashed for my car and i tried to reset the xk01 with no luck.  anyone have any ideas?? thanks
craig dennis 
Member - Posts: 7
Member spacespace
Joined: July 12, 2008
Location: Arizona, United States
Posted: September 11, 2008 at 1:20 AM / IP Logged  

to reset it      u have to reflash it thats the only way other than that its late here so ill read again in the morning and see if i can be of more help

megaman 
Copper - Posts: 385
Copper spacespace
Joined: June 24, 2008
Location: Montana, United States
Posted: September 11, 2008 at 8:54 AM / IP Logged  

If it won't reset with the standard method which is pressing the program button while inserting the harness, then you'll need to reflash the firmware.

I've had a few of the xk01's not program, but after the reset method, they worked fine.  Just make sure you continue to press the program button, then insert the harness, and wait until it flashes rapidly before you let go of the program button.

kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: September 12, 2008 at 9:18 AM / IP Logged  
also, don't let go as soon as it starts flashing... hold it for about 4 seconds and you'll hear a click from the module...then it's ready to go....
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: September 12, 2008 at 8:25 PM / IP Logged  
The XK01 should do everything on that car. Shouldn't need the XK06 at all.
By the way, the XK06 doesn't do locks anyway. It's for transponder bypass only in newer GM cars.
It's possible that maybe having the two modules in there at once is what's not letting you program the XK01.
Also, where is the purple wire from the XK01 connected in the car?
Should be connected to the purple databus wire in the car. You could catch the data wire almost anywhere you want (it runs all over the car, to various modules), but the easiest would be right at the OBDII diagnostic plug under the dash.
nbcadillac 
Member - Posts: 17
Member spacespace
Joined: June 17, 2008
Location: Pennsylvania, United States
Posted: September 13, 2008 at 10:32 AM / IP Logged  
Thanks for all of the help. I just took it back to the shop that sold me the starter and modules and had them install it. So, not everything works as it should..
nbcadillac 
Member - Posts: 17
Member spacespace
Joined: June 17, 2008
Location: Pennsylvania, United States
Posted: September 13, 2008 at 10:47 AM / IP Logged  
I meant now, everything works as it should..

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer